Dotted-underlined terms open a quick definition. Close it to keep reading.
Your Litecoin wallet says a payment failed, but the screen still shows a . Has the fee gone? For an ordinary transparent payment, an active-chain is where the miner fee becomes part of the ledger. A draft can display a fee, and an unconfirmed transaction can have a fee calculated to the last . Both are possible before a miner has included the transaction in a block.
We tested this with two signed transactions spending the same 1 test LTC. One offered a fee of 1 litoshi and was rejected by our . The other offered 1,000 litoshis, entered the node’s waiting pool, disappeared when we restarted the isolated node without saving its pool and was later included in a test block. The same 1,000-litoshi fee was visible before and after . Only the block recorded it as a mined fee.
If you are looking at an withdrawal, check its account history as well. A and a Litecoin miner fee are different amounts on different records. If you see two fees or a lower balance, first work out which record each number came from.
“Failed” can be a message from your , a node, the sending service or the recipient’s checkout. Start with the exact wording and the screen displaying it. Then look for a ID, usually called a . An exchange order reference can identify your withdrawal request even after the service has failed to produce a public transaction.
What the displayed status tells you about a Litecoin network fee
What you see
What the fee means
Your next check
The send form rejected the address or amount
A fee may have been quoted while you filled in the form. A draft that was never submitted incurs no miner fee.
Check the destination, exact recipient amount and available balance. Read the app’s send history before assuming it created a transaction.
The wallet or a node rejected the signed transaction
Its fee may already be encoded in the amounts. A local rejection leaves no confirmed fee for that attempt on that node’s chain view.
Check where it was submitted, whether it was also shared elsewhere and whether it appears in a block.
The transaction is pending with zero confirmations
The fee is attached to a proposed spend. A wallet can already account for it in the available balance.
Save the TXID and check the transaction state, recipient output and software’s own pending-payment guidance.
One explorer cannot find the hash
The explorer has no record to show. It might have missed the transaction or be looking at a different network or time.
Check the full TXID, correct route, broadcast record and a second up-to-date source before making another payment.
A matching output is confirmed, but the order or deposit says failed
The miner fee already belongs to the confirmed transfer. An order, credit or refund can still be unresolved.
Match the actual output amount and address. Ask the receiving party about its minimum, confirmation threshold or invoice state.
Your exchange debited an amount for a failed withdrawal
The debit is an account entry. The service’s status, terms and adjustment history determine what it did with the amount.
Check the withdrawal reference and any credited reversal. Ask for the public TXID if the service says it broadcast.
Where the miner fee actually comes from
A Litecoin wallet spends one or more earlier outputs. The new transaction creates outputs for the recipient and, when needed, returns the leftover value to an the sender controls. Subtract the total value of those new outputs from the total value of the inputs. The difference is the fee for an ordinary transparent transaction.
In our accepted transaction, the input was 1.00000000 LTC, the recipient output was 0.30000000 LTC and the change was 0.69999000 LTC. The difference was 0.00001000 LTC, or 1,000 litoshis. There was no third output labeled “fee.” The node could calculate that difference just by inspecting the signed transaction and the input it referenced.
When a block includes the transaction, that difference contributes to the fees the miner can claim in the block’s , in addition to the block subsidy. Until then, a wallet may reserve the input or count an unconfirmed outgoing spend when reporting what is available. The displayed balance is useful for seeing what the wallet is willing to use. The confirmed chain is where you check what has actually been spent. Understand Litecoin fees · Compare exact payments, fee subtraction and send max.
What happened in our Litecoin Core test
We started with a confirmed 1 LTC output and built two ordinary transparent transactions. Both proposed the same payment of 0.3 test LTC. They spent the same input and sent change back to the payer. For the second candidate, we reduced the change to offer a higher fee. We chose those fees to get different outcomes on our test node. Neither amount is a mainnet fee recommendation.
One test chain, two signed candidates and five observation points
Stage
Fee in the signed candidate
What the node reported
1. Low-fee submission
1 litoshi
The node rejected it with min relay fee not met. The waiting pool stayed empty and the original 1 LTC output was still unspent.
2. Policy check only
1,000 litoshis
The second candidate passed testmempoolaccept. The check itself left the pool empty.
3. Explicit submission
1,000 litoshis
The pool displayed the fee and exposed the 0.3 LTC output with zero confirmations. A chain-only lookup found no recipient output yet.
4. Isolated restart
1,000 litoshis in the same signed bytes
We disabled pool persistence and automatic wallet broadcast and ran with zero peers. On restart the pool was empty. The original output was still unspent on-chain.
5. Resubmission and mining
1,000 litoshis
The same signed bytes returned the same TXID. The next block contained the payment, and the block’s reported total transaction fees were exactly 1,000 litoshis.
That local restart gives a useful side-by-side comparison. Our node knew the fee while the payment was pending. After the restart, the exact same signed bytes still existed in our test runner, but the payment was absent from the node’s waiting pool. Once we resubmitted and mined the candidate, the recipient output appeared in the chain and the original 1 LTC input was spent.
A restart of your wallet or node can leave other nodes’ records untouched. Anyone who has the signed bytes may still be able to submit them if the inputs remain available and the transaction meets the applicable rules. Clearing a local queue can change what you see without cancelling the payment across the network. How to avoid paying twice.
How to reproduce it
We used Litecoin Core 0.21.5.8 on regtest, a private development chain. We ran two daemon sessions of one disposable data directory and verified zero peers. All three wallets and both signed candidates were created for the test. We checked the outputs in integer litoshis and compared the node’s chain-only and -aware results. The last block contained the coinbase and one payment, so its totalfee came from that payment. The test covers transparent . It does not measure current mainnet fee policy, mobile balances, MWEB transfers, exchange accounting or other networks.
Suppose an exchange shows a 0.3000 LTC withdrawal and a 0.0020 LTC charge. The destination receives 0.2980 LTC if the service deducts that fee from the requested amount. Check the actual withdrawal preview and the finished record for your provider. The public transfer may have a smaller miner fee and include outputs for many customers. Its total fee covers the whole transaction.
For example, Coinbase Exchange says its withdrawal charge is based on its estimate of the network fee. That disclosure explains the nature of the charge. If a withdrawal fails, look for the provider’s entry reversing a debit, its terms for the specific status and the sender’s broadcast evidence. A missing explorer entry alone cannot tell you whether money is still held or has been returned to your exchange balance. Coinbase Exchange fee policy.
When the chain shows the expected output as confirmed and a merchant or exchange still says failed, take the next step with the recipient. A late invoice, an insufficient amount or a platform deposit minimum can block credit. The payment and its network fee remain part of the active chain unless the chain itself changes. A refund, where the recipient agrees to one, is a new transfer with its own fee and terms. Diagnose a confirmed Litecoin deposit that hasn’t appeared.
Before you press Send again
Keep the first record. Note the network, exact error or status, intended recipient amount, fee shown and timestamp. Copy the TXID if one exists.
Look for that exact transfer. Use your wallet and a trusted Litecoin transaction checker. A public transaction needs no wallet connection or to look up. If there is an exchange reference but no TXID, ask the sending service if it ever submitted the payment.
If the transfer is visible, match the actual output. Compare the full address and amount against the original recipient’s instructions. Read its current count. An output to somebody else, an underpayment and a merely pending transfer each call for different follow-up.
Read the wallet’s action before accepting it. Rebroadcasting identical signed bytes preserves the TXID. Some wallets can build a replacement that competes for the same inputs. A fresh payment can spend different inputs and may leave you paying twice. Confirm what your wallet will actually do.
Give support a specific question. “Was the withdrawal submitted to native Litecoin, what is its TXID, and how was the disputed charge recorded?” For the recipient, send the matching output and amount through official support. Keep and backup words out of the message. Prepare an evidence-based support request.
Common questions
Can a public explorer show a fee before confirmation?
Yes. If the explorer has the pending transaction and the input amounts, it can calculate the difference. Check the confirmation count beside that fee. Different explorers may see an unconfirmed transaction at different times.
Did I pay a fee just by opening the send preview?
Opening an ordinary Litecoin send preview can calculate a proposed fee. It does not, by itself, spend a confirmed output or settle that fee. Confirm the result in the app’s history if you also clicked through the send flow.
Can a wallet show my balance reduced before the payment confirms?
Yes. The app may include an outgoing pending payment or exclude inputs it considers reserved. Check the available balance, the pending transaction and the chain record. Those labels and recovery options depend on the wallet.
What if there are two different transaction IDs?
Compare the inputs and the intended recipient outputs. Two candidates spending the same input cannot both spend it in the same valid chain. Two independently funded payments can both confirm, so check both records before retrying or asking for a refund.
What if I was charged and the recipient returned the money?
If the original transfer was confirmed, a refund is another payment. Its amount depends on what the parties agreed, and its sender may pay another network fee. Keep both TXIDs if your transfer has a public record.
When a wallet says “failed,” start with one question: where is the evidence for that payment? The send screen shows intent, the waiting pool shows what one node has seen, the block records the transfer and the provider ledger shows what happened to your account.
The cover is an AI-generated editorial illustration.
Transaction Fee
In brief For ordinary transparent Litecoin transactions, the fee is total input value minus total output value, separate from a service withdrawal charge.
For an ordinary transparent Litecoin transaction, the network fee is the total input value minus all output values, including change. Wallets estimate it using transaction size and a fee rate, so sending more LTC does not automatically mean a higher fee. A service's withdrawal charge is a separate quote and may already cover network costs.
For example Fictional inputs total 1 LTC, while recipient and change outputs total 0.99999 LTC: the network fee is 0.00001 LTC.
Common mistake Confusing fee rate with total fee, leaving change out of output totals, or equating a service's withdrawal charge with the full network fee.
Compare: Network fee vs withdrawal fee
Transaction Fee
An ordinary transparent transaction's network fee is its total input value minus its total output value; transaction size and fee rate help determine the estimate.
Withdrawal Fee
A service sets its withdrawal charge under its own rules, and that charge can differ from the network fee on the transaction it broadcasts.
One example If a fictional service deducts a 0.001 LTC charge from a 1 LTC withdrawal, the recipient receives 0.999 LTC; these figures do not reveal the transaction's network fee.
Remember: Check the final account debit, recipient amount and minimum separately; add a network-fee estimate only if it is an additional charge, so the same cost is not counted twice.
In brief A peer-to-peer cryptocurrency with its own Scrypt proof-of-work network and a maximum issuance of 84 million LTC.
A peer-to-peer cryptocurrency launched in 2011. Litecoin uses Scrypt proof of work, targets an average 2.5-minute block interval and has an issuance schedule capped at 84 million LTC. Individual block times and payment acceptance times vary.
For example Sending 0.1 LTC on Litecoin transfers a fraction of one coin; you do not need to buy a whole LTC first.
Common mistake Assuming a token with LTC in its name on another network is automatically native Litecoin.
In brief A group of transactions linked to the previous block under the network's rules.
A batch of transactions accepted under the network rules and linked to the previous block. Litecoin targets one new block every 2.5 minutes on average; a particular block may arrive sooner or much later.
For example Your payment may wait unconfirmed and then receive its first confirmation when a miner includes it in an accepted block.
Common mistake Treating the 2.5-minute target as a countdown or a maximum wait for your payment.
In brief An informal name for 0.00000001 LTC, the smallest Litecoin unit, with 100,000,000 in one LTC.
An informal name for the smallest Litecoin unit: 0.00000001 LTC. One LTC contains 100,000,000 litoshis. Some software uses the inherited label satoshi, so always check which coin and unit a screen means.
For example 10,000 litoshis equal 0.0001 LTC; 1 litoshi equals 0.00000001 LTC.
Common mistake Confusing a fee quoted per virtual byte with that many litoshis for the whole transaction.
In brief A participant running network software; a full node checks rules but need not keep all old block files.
A participant running network software. A full node independently validates rules; a pruned full node can discard older block files after validation. Not every node stores the complete historical blockchain.
For example A pruned full node checks the chain but later discards old block files to reduce disk use.
Common mistake Assuming every node is a miner, or that pruning means it skipped consensus validation.
In brief Searching for valid proof of work and proposing Litecoin blocks that other nodes independently check.
Searching for proof of work and assembling candidate blocks that follow a network's rules. Validating nodes independently check proposed blocks. An accepted Litecoin block can pay its miner the permitted subsidy and transaction fees; a pool participant is paid under the pool's scheme.
For example An ASIC connected to a pool contributes proof-of-work attempts; the pool pays according to its published scheme.
Common mistake Comparing coin revenue without subtracting electricity, pool charges, downtime and equipment costs.
In brief A service for trading currencies or assets, whose custodial account balance does not give you control of its private keys.
A platform or service for buying and selling cryptocurrencies against fiat currencies or other assets. Trading methods, custody, supported pairs and withdrawal rules vary by service. A balance on a custodial exchange is an account claim; it does not mean you control the wallet's private keys.
For example After buying LTC on a custodial exchange, you request a withdrawal if you want it sent to your own wallet.
Common mistake Assuming an account balance means you possess the private keys, or overlooking the selected withdrawal network.
In brief A service's charge for moving LTC out, which can differ from the network fee and reduce what the recipient receives.
A charge a service quotes for moving LTC out of your account. Its rules determine the fee, minimum and amount received. A service can batch several withdrawals into one transaction, so one customer's quoted charge need not match the transaction's network fee. Check the final account debit and recipient amount before confirming.
For example If a service deducts a hypothetical 0.001 LTC fee from a 1 LTC withdrawal, the recipient receives 0.999 LTC; other services may quote the debit differently.
Common mistake Assuming an exchange charge is the network's fixed fee, or confirming without checking the final recipient amount and minimum.
Compare: Network fee vs withdrawal fee
Transaction Fee
An ordinary transparent transaction's network fee is its total input value minus its total output value; transaction size and fee rate help determine the estimate.
Withdrawal Fee
A service sets its withdrawal charge under its own rules, and that charge can differ from the network fee on the transaction it broadcasts.
One example If a fictional service deducts a 0.001 LTC charge from a 1 LTC withdrawal, the recipient receives 0.999 LTC; these figures do not reveal the transaction's network fee.
Remember: Check the final account debit, recipient amount and minimum separately; add a network-fee estimate only if it is an additional charge, so the same cost is not counted twice.
In brief Software or a device for managing wallet keys and payments, though a watch-only setup cannot sign on its own.
Software or a device that manages keys and helps you receive and send Litecoin. Coins are recorded on the blockchain. A watch-only wallet can show addresses and transactions without holding the keys needed to spend.
For example One wallet can generate several receiving addresses and still show them as a single combined balance.
Common mistake Thinking coins live inside the app, or that seeing a balance proves that the wallet can sign a spend.
In brief Recorded in accepted blockchain blocks, unlike account changes a service may make only in its own records.
Recorded in the blockchain's accepted blocks. For transparent Litecoin, many transaction details are publicly visible, but an exchange's internal account changes need not create an on-chain transaction. Blockchain records alone do not establish an owner's identity or why funds moved.
For example A confirmed ordinary LTC payment appears in Litecoin blocks; an exchange moving balances between its own customer accounts may not.
Common mistake Assuming every account activity creates a blockchain transaction or that every large transfer is a trade.
In brief A transaction identifier for looking up outputs and confirmations, which alone does not prove that a payment arrived.
The identifier used to look up a transaction. For an ordinary transparent Litecoin transaction it is shown as a 64-character hexadecimal string. Use it to inspect the transaction's outputs and confirmations; the ID alone does not prove a payment is confirmed.
For example Copy the TXID from your wallet's payment details into a Litecoin explorer to check the recipient output and confirmation count.
Common mistake Sharing a seed phrase to trace a payment, or treating a screenshot or TXID alone as proof that the expected amount arrived.
In brief An encoded payment destination whose network, owner and wallet compatibility still need checking.
An encoded destination for a payment. Common transparent Litecoin addresses begin with L, M or ltc1; MWEB uses a different address format. An address is not a bank account or proof of identity. Check network and wallet compatibility before sending.
For example To receive LTC, copy a Litecoin receiving address from your wallet and check it against the address shown to the sender.
Common mistake A valid-looking address does not prove that it belongs to the intended person or uses the network the sender selected.
In brief A block's special first transaction, used to claim newly created LTC and fees rather than spend ordinary earlier outputs.
The special first transaction in a block through which its creator can claim the allowed block subsidy and transaction fees. It does not spend ordinary previous outputs. Its spendable outputs are subject to coinbase maturity. This protocol term is separate from the similarly named exchange.
For example A block explorer shows a mining reward in the block's coinbase transaction. A later pool payout can be an ordinary transaction spending matured coins.
Common mistake Assuming an exchange withdrawal is a coinbase transaction because of the service's name, or treating newly mined outputs as immediately spendable.
In brief One node's local collection of accepted but unconfirmed transactions, which may differ from other nodes' collections.
A node's local collection of unconfirmed transactions it currently accepts. Nodes can see, retain or remove different transactions, so there is no single global waiting room. Appearing in a mempool is not confirmation or a guarantee of later inclusion.
For example One explorer may see your unconfirmed transaction while another node has not received it or has already removed it.
Common mistake Assuming that absence from one mempool proves the payment was never broadcast or that a seen transaction must confirm.
In brief A transaction format and validation change that separates witness data and changes how block capacity is counted.
Segregated Witness: a change to transaction serialization and validation that separates witness data, fixes certain transaction-malleability issues and changes capacity accounting. Litecoin activated it in May 2017.
For example An ltc1q receiving address uses a SegWit format; the sender still needs to check that its service accepts that address.
Common mistake Assuming every wallet supports every address format, or that SegWit guarantees a fixed confirmation time.
In brief Secret recovery words that need the right wallet format, settings and any extra passphrase; keep them offline.
A sequence of secret recovery words that some wallets use to rebuild keys. Recovery must match the original wallet's word format, settings and any extra passphrase; other wallets use different backup methods. Keep the words offline and follow the original wallet's official recovery instructions.
For example In a BIP39 wallet, the same words with a different extra passphrase produce a different seed and can show different addresses.
Common mistake Entering recovery words into a website, sharing them with support or assuming every Litecoin wallet uses the same word format.
Compare: Seed phrase vs private key
Seed Phrase
Recovery words used by many wallets to rebuild key material; the correct format, optional recovery passphrase and wallet settings still matter.
Private Key
A secret used to authorize spending under its key conditions; one exported private key is not necessarily a backup of every key a wallet uses.
One example A fictional simple HD wallet can derive several receiving keys from one recovery setup; exporting just one of those private keys does not preserve the others.
Remember: Identify the complete backup method for the original wallet, keep secret recovery material offline and never paste it into this website.
In brief A transaction gains confirmations as blocks build on its inclusion, but those confirmations can fall if chain history changes.
A transaction receives its first confirmation when included in a block in the accepted chain. Each block then built on top adds another. A chain reorganization can reduce or remove the count. The recipient decides how many confirmations it requires. Litecoin targets an average 2.5-minute block interval; individual blocks can arrive sooner or much later.
For example A transaction in the latest accepted block has one confirmation; the next block raises that count to two.
Common mistake Confusing a wallet's sent message, a TXID or mempool visibility with the first confirmation.
In brief Secret data a wallet uses to sign spending; one key may cover only part of a wallet and must never be shared.
Secret data used to authorize spending under the conditions attached to coins. In a simple single-key wallet, anyone with that key can spend the coins it controls. A wallet may manage many keys; never share them.
For example A wallet signs a spend using a private key; the recipient only needs your payment, not that secret key.
Common mistake Sharing a key with support or assuming one exported key necessarily backs up every address in a wallet.
Compare: Seed phrase vs private key
Seed Phrase
Recovery words used by many wallets to rebuild key material; the correct format, optional recovery passphrase and wallet settings still matter.
Private Key
A secret used to authorize spending under its key conditions; one exported private key is not necessarily a backup of every key a wallet uses.
One example A fictional simple HD wallet can derive several receiving keys from one recovery setup; exporting just one of those private keys does not preserve the others.
Remember: Identify the complete backup method for the original wallet, keep secret recovery material offline and never paste it into this website.
Content review recorded: 2026-11-22. The review record does not identify a separate independent reviewer. An edited date above records an edit, not a new fact-check. AI-assisted editing or new artwork alone does not complete a source review.
Editor-in-chief of Litecoin.watch and founder of MyBank.pl. His published work covers foreign exchange, financial education and Litecoin. On Litecoin.watch, his remit includes editorial direction, source transparency and the practical guides and research published by the site.